Posts Tagged ‘nitro racing’
Preparing your Nitro RC Engine only takes a few hours, but the benefits are worth the investment in time. In a nut shell RC 2-stroke engine use a tapered sleeve to create compression, while most full scale cars use piston rings. The process of breaking the engine in is to make sure that the piston and the sleeve have the best fit possible. Like all things RC it just depends on who you ask about breaking-in an engine.
From experience I can tell you that all the methods work well, when in doubt refer to the manual, they will have break-in procedures specific to your engine. the only important thing to remember is not to be too harsh on the engine, break it in slowly taking your time. Remember your not racing yet…
The 7 Step Break in Procedure
While most people recommend running about 5 tanks of fuel through the engine I generally like to run 7, I just like to make sure that I get the engine broken-in correctly. If you look at the oil that comes out the exhaust you’ll see that by the 5th or sixth run the tiny bits of metal will be gone from the flow, initially you can see the engine breaking-in from the oil and unburnt fuel.
Needle Settings
Refer to your manual for the specific settings for your engine. The problem is that because each RC Nitro Engine is different you can’t just copy your buddies settings, you have to work these out. Break in settings must be as rich as possible, this keep the engine cool and the excess fuel and oil will help flush out the tiny metal bits that come off during the break-in.
Fuel Tank #1
I’ll idle the engine for the entire tank, you often need to keep the throttle open about 10% during the first few minutes, at least while the engine warms up. Keep Brighton Bank the revs as low as possible, but don’t change the mixture needle settings just yet. Once the tank is complete let the engine cool down for about 5 – 15 minutes. Be sure to leave the piston at dead bottom center while it cools, or else the shrinking sleeve could cause a problem if the piston is also there.
Fuel Tank #2
After the initial idle stage I’ll run the car with as little throttle as possible, but keep Amoxil buy cheap the car moving, I make sure when I accelerate (not more than 25%) I’ll do it smoothly and consistently. It’s important to start putting some load on the engine, because when you race your RC Car there will be load on the engine. Try to match your break in conditions to your expected running conditions as closely as possible. The idea is to slowly build up the revs of your engine until your able to hit max speed by the end of the 7 th tank. Run your car in a figure-8, as turning makes the engine work slightly harder. After the 2nd Tank you can start to lean your motor out a little.
Fuel Tank #3 -#5
Now we’re ready to start getting some speed out of your RC Nitro Car. What I do is start to run the car up and down a long straight, with figure-8 patterns at a low idle between them. I will run at max 25% throttle for about a minute, then rev the RC car flat out for at most 2 seconds. then return to a the standard max 25% throttle. Make sure you get your car to rev right through it’s range, but don’t keep it at full throttle for too long.
Fuel Tank #5 – #7
I continue as above, but shortening the periods between the bursts of full throttle. I also start to work out the tune of my car, I only change the air / fuel mixture before the 5th tank if I’m struggling to keep the engine running. After the 5th tank I start to lean the mixture buy generic amoxil by 1/8th turn. I still like to run it until there are no small metal bits in the exhaust discharge.
Once your done with the above break-in procedure I would still run my RC Car gently for the first couple of times on the track, this will ensure that you get the most life our of your brand new RC Nitro Engine.
online ampicillin width=”425″ />
Best quality RC Toys, Radio Control toys and RC nitro
… best radio control toys like RC helicopters, nitro gas powered on-road/off-road buggies, RC nitro gas powered monster trucks, dragonfly king mini electric helicopters, battery operated speed boats, etc at the lowest, cheapest possible price. … We seek to provide you the best RC Helicopter, Nitro Gas Car, RC Monster Truck, RC Airplanes, and much more for the kid inside each one of us.
Quality Model Ships: Remote Control Boats!
My favorite remote control boat is the Wicked Angel 2 Remote Control Boat. It sells for $379.99 and shipping is FREE! Here are it’s features: RC Boat – NITRO SPEEDBOAT W/ RADIO & TUNED EXHAUST … Wicked Angel’s modified V hull design featuring multiple planning strakes for breaking up water surface tension, the biggest drag-causing factor on any race boat, and the Wicked Angel’s planing strakes are placed at serveral levitra pharmacy points
Discover The Thrill Of Driving Radio Controlled Boats
Just like when you buy a new car you have to break in your Radio Controlled Boats. Especially when you buy a nitro boat. as you break in your nitro boat you will start to Lean it out.
S.O.S. Traxxas Nitro Vee – R/C Tech Forums
Other wise it’s running lean and need to be richend up. BTW to launch a nitro boat you don’t set it in the water, you give it a toss so it has some good forward momentum when it hits the water. … also check to make sure you have a good seal on the fuel tank and no holes in the fuel line.. retune slightly leaner than startup/breakin procedure and start from there. also make sure you have a fresh glow plug
Redcat Racing Landslide review! Landslide
Although the landslide comes complete, it is lacking a wheel wrench, which is an essential tool for any rc owner. I would suggest you purchase one and keep it in your pit box. That way, you can check the wheel nuts before every … Engine tune ability is another well-desired trait of any nitro engine and the SH18 is extremely tune-friendly. After break-in, a few adjustments to the top and bottom needles landed a sweet spot that, so far, has not needed any readjustment
which boat Blackjack 26 or nitro SuperVee – RC Groups
Neither boat is perfect but the SV 27 cheap buy ampicillin has less issues. The biggest problem with the Blackjack is the steerable outdrive. The U-joints are breaking on them and steerable outdrives can make the handling "interesting" at times. … I dont think you should have any problems though, because this boat is built well and i suggest it to anybody looking in to RC NITRO BOATING!!
Gas powered RC boats info
So, you’ve decided to get into gas powered RC boats, also known as Nitro boats. They come in a variety of styles and configurations and many are scale models of real vessels, including racing boats, military ships, aircraft carriers, etc. … Break in your Glow Plugs: The idea is to temper the tiny coil by heat and cooling 4 times. Take new glow plugs and ignite them with your glow starter for 10 seconds and then let cool.
Author: Gregory Alexander
Gregory Alexander has been racing and Drifting Nitro Powered RC Cars for several years, he is a lead member of Karnage RC and Drift Club. More RC Tips and Tricks can be found here : The Ultimate RC Drift Resource Site.
Article Source: http://EzineArticles.com/?expert=Gregory_Alexander
Mail this post
Also Available From Amazon
